QUOTATION OF CHUN ZU
5 DIE
PART FORMER
MODEL CBP-135 LLA
STANDARD MACHINE SPECIFICATIONS: METRIC DECIMAL
MAX CUT-OFF DIAMETER AT 85,000 PSI TENSILE 18 .708 .
NOMINAL BOLT CAPACITY M8 - M12.7 .314 - .500
MINIMUM CUT-OFF LENGTH 26 1.020
MAX. CUT-OFF LENGTH 240 9.448
MAX. TRANSFERABLE BLANK LENGTH 240 9.449
MAXIMUM KICKOUT LENGTH 40 ~ 210 1.020 ~ 8.267
PUNCH KICKOUT STROKE (MAXIMUM LENGTH) 40 1.574
PRODUCTION CAPACITY  - MAXIMUM (PPM) 45 ~ 90
BLANK SHANK LENGTH CAPACITY 40 ~ 200 1.574 ~ 7.874
MAIN DRIVE MOTOR-AC MOTOR WITH INVERTER 60 HP
MACHINE WEIGHT (Approximate) 42,000 KG  92,400 LBS 
HEADING TONNAGE 140,000 kgf 140 TONS
AIR PRESSURE REQUIREMENT 6kgf/cm2 85PSI
TRIMMING 5TH STATION K.O. MAXIMUM 200 7.874
MACHINE MEASUREMENT:  L x W x H 20' X 12' X 8'
STANDARD ACCESSORIES & FEATURES:    
1 ONE SET OF TOOLING
2 ONE SET OF STANDARD SPARE PARTS
3 ONE WIRE STAND
4 PRODUCT CONVEYOR
5 OPERATOR PLATFORM
6 FULL PROTECTIVE SAFETY COVER AND GUARDING
7 AC MOTOR DRIVE + INVERTER BY SIEMENS
8 CLOSED BUSHING CUTOFF SYSTEM
9 INDEPENDENT PUNCH ADJUSTMENT
10 RAM SLIDE WITH OVERARM EXTENSION
11 POSITIVE TIMED PUNCH KNOCKOUT ALL STATIONS
12 TRIM KICKOUT AT 5TH STATION
13 THREE-WAY AIR CLUTCH BRAKE DESIGN FOR:
1.  Inching
2.  Single-stroke
3.  Continuous running
4.  Ramslide always stops at back dead center
14 MACHINE FRAME ANNEALED
15 RAM SLIDE ANNEALED
16 CAD/CAM DESIGNED CAMS
17 PNEUMATICALLY REGULATED TRANSFER FINGERS WHICH INCLUDE BOTH:
1.  STRAIGHT ACROSS TRANSFER WITH FIVE SETS OF BOLT TYPE TRANSFER CASSETTES
2.  UNIVERSAL TYPE TRANSFER WITH FIVE SETS OF ROTATE TYPE TRANSFER CASSETTES
18 ALIGNMENT JIG
19 AUTO CHECKER:
1. Out-put speed 5.  Electric parts counter
2.  Main motor overload 6.  Low oil shut-off
3.  Short cut-off detector 7.  Low air pressure shut-off
4.  End of coil shut-off switch 8.  Two hand jog for operation
20 HORIZONTAL & VERTICAL ROLL TYPE WIRE STRAIGHTENER
21 RECIRCULATING OIL CLEANING SYSTEM
22 HANDWHEEL FOR KICKOUT ADJUSTMENT
23 1ST TRANSFER AIR SOLENOID DROP OFF
OPTIONS     
HYDRAULIC CLAMPING FOR TRANSFER SYSTEM
TOOLING SPECIFICATIONS: DIAMETER X LENGTH METRIC DECIMAL
CUTOFF QUILL 58 X 80 2.283 X 3.150
DIE BORE-ALL STATIONS 110 X 240 4.330 X 9.449
CENTER DISTANCE BETWEEN DIES 128 5.039
PUNCH BORE-ALL STATIONS 75 X 178 2.953 X 7.008
*Note:  Other sizes available upon request.  All machine and tool specifications
subject to change without notice.
QUALITY REBUILDING CORPORATION
"OVER 13,000 MACHINES SOLD WORLD WIDE"