QUOTATION OF CHUN ZU
5 DIE
PART FORMER
S/N:  21339-01
MODEL CBP-135 LLA
STANDARD MACHINE SPECIFICATIONS: METRIC DECIMAL
1 MAX CUT-OFF DIAMETER AT 85,000 PSI TENSILE 18 .708 .
2 NOMINAL BOLT CAPACITY M8 - M12.7 .314 - .500
3 MINIMUM CUT-OFF LENGTH 26 1.020
4 MAX. CUT-OFF LENGTH 240 9.448
5 MAX. TRANSFERABLE BLANK LENGTH USING STANDARD
TRANSFER SYSTEM 240 9.449
6 MAX. MOVABLE DISTANCE OF GRIPPER AWAY FROM DIE 15 .590
7 MAX TRANSFERABLE BLANK LENGTH THAT CAN BE 
TURNED USING UNIVERSAL TRANSFER SYSTEM 44 1.732
8 MAXIMUM KICKOUT LENGTH 40 ~ 210 1.020 ~ 8.267
9 PUNCH KICKOUT STROKE (MAXIMUM LENGTH) 40 1.574
10 PRODUCTION CAPACITY  - MAXIMUM (PPM) 45 ~ 90 45 ~ 90
11 BLANK SHANK LENGTH CAPACITY 40 ~ 200 1.574 ~ 7.874
12 MAIN DRIVE MOTOR-AC MOTOR WITH INVERTER 60 HP
13 MACHINE WEIGHT (Approximate) 42,000 KG  92,400 LBS 
14 HEADING TONNAGE 140,000 kgf 140 TONS
15 AIR PRESSURE REQUIREMENT 6kgf/cm2 85PSI
16 TRIMMING 5TH STATION K.O. MAXIMUM 200 7.874
17 MACHINE MEASUREMENT:  L x W x H 20' X 12' X 8'
STANDARD ACCESSORIES & FEATURES:    
1 ONE SET OF STANDARD SPARE PARTS
2 ONE WIRE STAND
3 PRODUCT CONVEYOR
4 OPERATOR PLATFORM
5 FULL PROTECTIVE SAFETY COVER AND GUARDING WITH INTERLOCK PROTECTION AND
LIGHTED DIE AND K.O. AREA.
6 AC MOTOR DRIVE + INVERTER BY SIEMENS
7 CLOSED BUSHING CUTOFF SYSTEM
8 INDEPENDENT PUNCH ADJUSTMENT
9 RAM SLIDE WITH OVERARM EXTENSION
10 POSITIVE TIMED ADJUSTABLE P.K.O. IN  ALL STATIONS
11 BOTH TRIM AND STANDARD KICKOUT CAM FOR 5TH STATION
12 THREE-WAY AIR CLUTCH BRAKE DESIGN FOR:
1.  Inching
2.  Single-stroke
3.  Continuous running
4.  Ram slide always stops at back dead center
13 SOLID ONE PIECE MACHINE FRAME ANNEALED
14 RAM SLIDE ANNEALED
15 CAD/CAM DESIGNED CAMS
16 PNEUMATICALLY REGULATED TRANSFER FINGERS WHICH INCLUDE BOTH:
1.  STRAIGHT ACROSS TRANSFER WITH FIVE SETS OF BOLT TYPE TRANSFER CASSETTES
2.  UNIVERSAL TYPE TRANSFER WITH FIVE SETS OF ROTATE TYPE TRANSFER CASSETTES
17 ALIGNMENT JIG
18 AUTO CHECKER:
1. Out-put speed 5.  Electric parts counter
2.  Main motor overload 6.  Low oil shut-off
3.  Short cut-off detector 7.  Low air pressure shut-off
4.  End of coil shut-off switch 8.  Two hand jog for operation
19 HORIZONTAL & VERTICAL ROLL TYPE POWER WIRE STRAIGHTENER
20 RECIRCULATING OIL CLEANING SYSTEM
21 HAND WHEEL FOR KICKOUT ADJUSTMENT
22 1ST TRANSFER AIR SOLENOID DROP OFF FOR SHORT FEEDS
23 PUNCH KNOCK OUT SAFETY PINS
24 KNOCK OUT SAFETY PINS
OPTIONS INCLUDED ON THIS CBP-135 LLA     
1 HYDRAULIC CLAMPING FOR TRANSFER SYSTEM
2 HAND WHEEL FOR KICKOUT ADJUSTMENT WITH DIGITAL READ OUT
3 HAND WHEEL FOR STOPPER LENGTH ADJUSTMENT WITH DIGITAL READ OUT 
4 FEED LENGTH ADJUSTMENT BY AC MOTOR
5 OIL FLOW RATE MONITOR FOR MAIN BEARINGS AND RAM SLIDE
6 TEMPERATURE MONITOR FOR MAIN BEARINGS AND RAM SLIDE
7 AUTO UP / DOWN DIE COOLANT DELIVERY BAR
**CBP-135LLA IS A 6 DIE FRAME CONVERTED TO A 5 DIE FOR EXTRA STRENGTH
AND LARGER TOOLING SIZES
TOOLING SPECIFICATIONS: DIAMETER X LENGTH METRIC DECIMAL
1 CUTOFF QUILL 58 X 80 2.283 X 3.150
2 DIE BORE-ALL STATIONS 110 X 240 4.330 X 9.449
3 CENTER DISTANCE BETWEEN DIES 128 5.039
4 PUNCH BORE-ALL STATIONS 75 X 178 2.953 X 7.008
*Note:  Other sizes available upon request.  All machine and tool specifications
subject to change without notice.
OPERATOR TRAINING:    
Operator training is available in your plant.
     
TOTAL PRICE WITH OPTIONS    CALL 
TERMS AND CONDITIONS:
1.  FOB:  VALPARAISO, IN
2.  PAYMENT TERMS: PAYMENT DUE AT SHIPMENT    
DELIVERY:  MACHINE IN STOCK    
WARRANTY: ONE YEAR PARTS AND LABOR
QUALITY REBUILDING CORPORATION
"OVER 13,000 MACHINES SOLD WORLD WIDE"