QUOTATION OF CHUN ZU
5 DIE
PART FORMER
	MODEL	CBP-305 L
	STANDARD MACHINE SPECIFICATIONS:	METRIC	DECIMAL
1	MAX CUT-OFF DIAMETER AT 85,000 PSI TENSILE	36	1.417			.
2	NOMINAL BOLT CAPACITY	24 ~ 30	1.000 ~ 1.181
3	MINIMUM CUT-OFF LENGTH	90	3.543
4	MAX. CUT-OFF LENGTH	420	16.535
5	MAX. TRANSFERABLE BLANK LENGTH	420	16.535
6	MAXIMUM KICKOUT LENGTH	380	14.961
7	MINIMUM KICK-OUT LENGTH	100	3.937
8	PUNCH KICKOUT STROKE (MAXIMUM LENGTH)	60	2.362
9	PRODUCTION CAPACITY RANGE - MAXIMUM (PPM)	45	45
10	BLANK SHANK LENGTH CAPACITY	100 ~ 350	3.937 ~ 13.780
11	PRODUCTION CAPACITY RANGE - MINIMUM (PPM)	30
12	MAIN DRIVE MOTOR-AC MOTOR WITH INVERTER		175 HP
13	MACHINE WEIGHT (Approximate)		200 TONS
14	HEADING TONNAGE		550 TONS
15	AIR PRESSURE REQUIREMENT	6kgf/cm2	85 PSI
16	TRIMMING 5TH STATION K.O. MAXIMUM	350	13.780
17	LUBRICATION / COOLANT TANK CAPACITY	2700 L	715 GAL
18	MACHINE MEASUREMENT (L x W x H)	41' x 21' x 11'
	STANDARD ACCESSORIES & FEATURES:
1	ONE SET OF TOOLING DESIGNED TO YOUR PART PRINT
2	SET OF STANDARD SPARE PARTS
3	WIRE STAND
4	PRODUCT CONVEYOR
5	OPERATOR PLATFORM
6	FULL PROTECTIVE SAFETY COVER AND GUARDING
7	AC MOTOR DRIVE + INVERTER (SIEMENS)
8	CLOSED BUSHING CUTOFF SYSTEM
9	INDEPENDENT PUNCH ADJUSTMENT
10	RAM SLIDE WITH OVERARM EXTENSION
11	POSITIVE TIMED PUNCH KNOCKOUT ALL STATIONS
12	TRIM KICKOUT AT 5TH STATION
13	THREE-WAY AIR CLUTCH BRAKE DESIGN FOR:
	1.  Inching
	2.  Single-stroke
	3.  Continuous running
	4.  Ramslide always stops at back dead center
14	MACHINE FRAME ANNEALED
15	RAM SLIDE ANNEALED
16	CAD/CAM DESIGNED CAMS
17	PNEUMATICALLY REGULATED TRANSFER FINGERS WHICH INCLUDE BOTH:
	1. STRAIGHT ACROSS TRANSFER WITH FIVE SETS OF BOLT TYPE TRANSFER CASSETTES
	2. UNIVERSAL TYPE TRANSFER WITH FIVE SETS OF ROTATE TYPE TRANSFER CASSETTES
18	ALIGNMENT JIG
19	AUTO CHECKER:
	1. Out-put speed	5.  Electric parts counter
	2.  Main motor overload	6.  Low oil shut-off
	3.  Short cut-off detector	7.  Low air pressure shut-off
	4.  End of coil shut-off switch	8.  Two hand jog for safe operation
20	RECIRCULATING OIL CLEANING SYSTEM
21	POWER WIRE STRAIGHTENER AND UNCOILER OR
	INDEPENDENT HORIZONTAL & VERTICAL ROLL TYPE WIRE STRAIGHTENER
22	HAND WHEEL FOR KICKOUT ADJUSTMENT
23	HANDWHEEL FOR WIRE STOP ADJUSTMENT
24	A.C. MOTOR FOR WIRE FEEDING LENGTH ADJUSTMENT
25	1ST TRANSFER AIR SOLENOID DROP OFF
1	CUTOFF QUILL (D X L)	118 x 180	4.646 x 7.087
2	CUTTER THICKNESS	45	1.772
3	DIE BORE-ALL STATIONS (D X L)	168 x 420	6.614 x 16.535
4	CENTER DISTANCE BETWEEN DIES	180	7.087
5	PUNCH BORE-ALL STATIONS	140 x 300	5.512 x 11.812
	*Note:  Other sizes available upon request.  All machine and tool specifications
	subject to change without notice.
	QUALITY REBUILDING CORPORATION
	"OVER 12,000 MACHINES SOLD WORLD WIDE"