QUOTATION OF CHUN ZU
	4 DIE
	PART FORMER
	MODEL	CBF-134LL
	STANDARD MACHINE SPECIFICATIONS:	METRIC	DECIMAL
1	MAX CUT-OFF DIAMETER AT 85,000 PSI TENSILE	15	.590			.
2	NOMINAL BOLT CAPACITY	M8 - M12.7	.315 - .500
3	MINIMUM CUT-OFF LENGTH	35	1.378
4	MAX. CUT-OFF LENGTH	285	11.220
5	MAX. TRANSFERABLE BLANK LENGTH	285	11.220
6	MAXIMUM KICKOUT LENGTH	270	10.630
7	MINIMUM KICK-OUT LENGTH	75	2.952
8	PUNCH KICKOUT STROKE (MAXIMUM LENGTH)	30	1.181
9	PRODUCTION CAPACITY RANGE -MAXIMUM (PPM)	80	80
10	BLANK SHANK LENGTH CAPACITY	80 - 254	3.150 - 10.000
11	PRODUCTION CAPACITY RANGE -MINIMUM (PPM)	40	40
12	MAIN DRIVE MOTOR-AC MOTOR WITH INVERTER	37.3kw	50HP
13	MACHINE WEIGHT (Approximate)	38,000 kg	83,600 LBS
14	HEADING TONNAGE	120,000KN	120 Tons
15	AIR PRESSURE REQUIREMENT	6kgf/cm2	85PSI
16	TRIMMING 4TH STATION K.O. MAXIMUM	254	10.000
17	LUBRICATION / COOLANT TANK CAPACITY	1,030L	272 GAL
18	MACHINE MEASUREMENT (approximate L x W x H)		23'3"x8'5"x7'7"
	STANDARD ACCESSORIES & FEATURES:
1	ONE SET OF TOOLING DESIGNED TO YOUR PART PRINT
2	ONE SET OF STANDARD SPARE PARTS
3	ONE WIRE STAND
4	PRODUCT CONVEYOR
5	OPERATOR PLATFORM
6	FULL PROTECTIVE SAFETY COVER AND GUARDING
7	AC MOTOR DRIVE + INVERTER
8	CLOSED BUSHING CUTOFF SYSTEM
9	INDEPENDENT PUNCH ADJUSTMENT
10	RAM SLIDE WITH OVERARM EXTENSION
11	POSITIVE TIMED PUNCH KNOCKOUT ALL STATIONS
12	TRIM KICKOUT AT 4TH STATION
13	THREE-WAY AIR CLUTCH BRAKE DESIGN FOR:
	1.  Inching
	2.  Single-stroke
	3.  Continuous running
	4.  Ramslide always stops at back dead center
14	MACHINE FRAME ANNEALED
15	RAM SLIDE ANNEALED
16	CAD/CAM DESIGNED CAMS
17	PNEUMATICALLY REGULATED TRANSFER FINGERS
18	ALIGNMENT JIG AND SPARE TRANSFER
19	AUTO CHECKER:
	1. Out-put speed	5.  Electric parts counter
	2.  Main motor overload	6.  Low oil shut-off
	3.  Short cut-off detector	7.  Low air pressure shut-off
	4.  End of coil shut-off switch	8.  Two hand jog for safe operation
20	POWER HORIZONTAL & VERTICAL ROLL TYPE WIRE STRAIGHTENER
21	CENTRIFICAL RECIRCULATING OIL CLEANING SYSTEM
22	1ST TRANSFER AIR SOLENOID DROP OFF
	OPTIONS:
	HYDRAULIC CLAMPING FOR TRANSFER SYSTEM
	HANDWHEEL FOR WIRE STOP ADJUSTMENT
	A/C ADJUSTED FEED LENGTH
	SOUND PROOF COVER
	TOOLING SPECIFICATIONS:	METRIC	DECIMAL
		Diameter x Length	Diameter x Length
1	CUTOFF QUILL	55	2.165
2	CUTTER THICKNESS	35	1.378
3	DIE BORE-ALL STATIONS	86 x 305	3.386 x 12.008
4	CENTER DISTANCE BETWEEN DIES	110mm	4.331
5	PUNCH BORE-ALL STATIONS	60 x 229	2.362 x 9.016
	*Note:  Other sizes available upon request.
	All machine and tool specifications subjct to change without notice
	OPERATOR TRAINING:
	Additional operator training is available.
	TOTAL PRICE WITH OPTIONS:		CALL
	TERMS AND CONDITIONS:
	1.  FOB: VALPARAISO, IN
	2.  PRICE VALIDITY 30 DAYS FROM QUOTATION DATE
	3.  NET 10 DAYS
	DELIVERY:  IN STOCK
	WARRANTY: ONE YEAR PARTS AND LABOR
	QUALITY REBUILDING CORPORATION